Machinery
Course Details
KTO KARATAY UNIVERSITY
Trade and Industry Vocational School
Programme of Machinery
Course Details
Trade and Industry Vocational School
Programme of Machinery
Course Details
| Course Code | Course Name | Year | Period | Semester | T+A+L | Credit | ECTS |
|---|---|---|---|---|---|---|---|
| 08830102 | Hydraulics and Pneumatics | 2026 | Autumn | 3 | 2+1+0 | 5 | 5 |
| Course Type | Compulsory |
| Course Cycle | Associate (Short Cycle) (TQF-HE: Level 5 / QF-EHEA: Short Cycle / EQF-LLL: Level 5) |
| Course Language | Turkish |
| Methods and Techniques | Lecture, question and answer, discussion, case study, problem-solving, circuit diagram reading and drawing exercises, practical demonstrations, and laboratory applications. |
| Mode of Delivery | Face to Face |
| Prerequisites | There are no prerequisites for this course. |
| Coordinator | Lect. Mehmet AKSOY |
| Instructor(s) | Lect. Muhammed Emin BOYACIOĞLU |
| Instructor Assistant(s) | - |
Course Instructor(s)
| Name and Surname | Room | E-Mail Address | Internal | Meeting Hours |
|---|---|---|---|---|
| Lect. Muhammed Emin BOYACIOĞLU | T-202 | [email protected] | 7671 | Monday 14.00 - 16.00 |
Course Content
Introduction to fluid power, basic principles of hydraulic and pneumatic systems, pressure and flow rate concepts, hydraulic and pneumatic circuit components, pumps, compressors, cylinders, motors, directional control valves, pressure control valves, flow control valves, connection components, reading and drawing hydraulic and pneumatic circuit diagrams, basic circuit applications, operating principles of systems, and introduction to maintenance and fault diagnosis.
Objectives of the Course
The aim of this course is to teach students the basic operating principles, circuit components, and application areas of hydraulic and pneumatic systems. It also aims to provide students with the skills to read fluid power circuit diagrams, construct basic circuits, and analyze the operating principles of these systems.
Contribution of the Course to Field Teaching
| Basic Vocational Courses | X |
| Specialization / Field Courses | X |
| Support Courses | |
| Transferable Skills Courses | |
| Humanities, Communication and Management Skills Courses |
Relationships between Course Learning Outcomes and Program Outcomes
| Relationship Levels | ||||
| Lowest | Low | Medium | High | Highest |
| 1 | 2 | 3 | 4 | 5 |
| # | Program Learning Outcomes | Level |
|---|---|---|
| P3 | Effectively uses information technologies (software, programs, animation, etc.) related to their profession. | 4 |
| P4 | Evaluates professional problems and issues independently, using an analytical and critical approach, and proposes solutions. | 4 |
| P14 | It detects faults in machine systems and performs maintenance operations. | 5 |
| P17 | Explains hydraulic and pneumatic systems. | 5 |
| P23 | Selects and uses appropriate methods and tools related to occupational health and safety to solve problems encountered in creating a healthy and safe working environment. | 5 |
Course Learning Outcomes
| Upon the successful completion of this course, students will be able to: | |||
|---|---|---|---|
| No | Learning Outcomes | Outcome Relationship | Measurement Method ** |
| O1 | Tests and analyzes hydraulic and pneumatic circuit designs using simulation software (FluidSIM, etc.) and resolves potential design errors. | P.3.9 | 1,7 |
| O2 | Selects the necessary hydraulic and pneumatic circuit components and system parameters (pressure, flow rate, force) for a given industrial application by calculating them. | P.4.9 | 1,7 |
| O3 | Identifies malfunctions in hydraulic and pneumatic systems and develops analytical solutions for maintenance and repair processes. | P.14.2 | 1,7 |
| O4 | It explains the fundamental physical principles of hydraulic and pneumatic systems, fluid properties, and the operating principles of circuit components (pumps, compressors, valves, cylinders, etc.). | P.17.1 | 1,7 |
| O5 | Draws and reads hydraulic and pneumatic circuit diagrams using standard symbols and technical drawing rules. | P.17.2 | 1,7 |
| O6 | Assesses risks in high-pressure fluid and compressed air systems; selects appropriate OHS methods and safety tools, and implements them in compliance with environmental safety regulations. | P.23.3 | 1,7 |
| ** Written Exam: 1, Oral Exam: 2, Homework: 3, Lab./Exam: 4, Seminar/Presentation: 5, Term Paper: 6, Application: 7 | |||
Weekly Detailed Course Contents
| Week | Topics |
|---|---|
| 1 | Introduction to Fluid Power and Basic Principles of Hydraulic and Pneumatic Systems |
| 2 | Concepts of Pressure, Force, Flow Rate, and Flow Velocity |
| 3 | Basic Components of Hydraulic Systems and Hydraulic Fluids |
| 4 | Hydraulic Pumps, Hydraulic Motors, and Cylinders |
| 5 | Directional Control Valves and Their Symbols |
| 6 | Pressure Control Valves and Flow Control Valves |
| 7 | Basic Hydraulic Circuits and Reading Circuit Diagrams |
| 8 | Hydraulic Circuit Design and Applications |
| 9 | Compressors, Air Preparation Units, and Connection Components |
| 10 | Pneumatic Cylinders, Directional Control Valves, and Flow Control Components |
| 11 | Temel Pnömatik Devreler ve Devre Şemalarının Çizilmesi |
| 12 | Applications, Fault Diagnosis, and Maintenance of Hydraulic and Pneumatic Systems |
| 13 | Applications, Fault Diagnosis, and Maintenance of Hydraulic and Pneumatic Systems |
| 14 | Comparison of Hydraulic and Pneumatic Systems and General Review |
Textbook or Material
| Resources | Recep ÖZTÜRK," Hidrolik-Pnömatik1" Pinceshes J.M, Ashby J.G. "Güç hidroliği" |
Evaluation Method and Passing Criteria
| In-Term Studies | Quantity | Percentage |
|---|---|---|
| Attendance | - | - |
| Laboratory | - | - |
| Practice | 1 | 20 (%) |
| Homework | - | - |
| Presentation | - | - |
| Projects | - | - |
| Quiz | - | - |
| Midterms | 1 | 30 (%) |
| Final Exam | 1 | 50 (%) |
| Total | 100 (%) | |
ECTS / Working Load Table
| Quantity | Duration | Total Work Load | |
|---|---|---|---|
| Course Week Number and Time | 14 | 2 | 28 |
| Out-of-Class Study Time (Pre-study, Library, Reinforcement) | 14 | 4 | 56 |
| Midterms | 1 | 14 | 14 |
| Quiz | 0 | 0 | 0 |
| Homework | 0 | 0 | 0 |
| Practice | 14 | 2 | 28 |
| Laboratory | 0 | 0 | 0 |
| Project | 0 | 0 | 0 |
| Workshop | 0 | 0 | 0 |
| Presentation/Seminar Preparation | 0 | 0 | 0 |
| Fieldwork | 0 | 0 | 0 |
| Final Exam | 1 | 18 | 18 |
| Other | 0 | 0 | 0 |
| Total Work Load: | 144 | ||
| Total Work Load / 30 | 4,80 | ||
| Course ECTS Credits: | 5 | ||
Course - Learning Outcomes Matrix
| Relationship Levels | ||||
| Lowest | Low | Medium | High | Highest |
| 1 | 2 | 3 | 4 | 5 |
| # | Learning Outcomes | P3 | P4 | P14 | P17 | P23 |
|---|---|---|---|---|---|---|
| O1 | Tests and analyzes hydraulic and pneumatic circuit designs using simulation software (FluidSIM, etc.) and resolves potential design errors. | - | - | - | 5 | - |
| O2 | Selects the necessary hydraulic and pneumatic circuit components and system parameters (pressure, flow rate, force) for a given industrial application by calculating them. | - | 5 | - | - | - |
| O3 | Identifies malfunctions in hydraulic and pneumatic systems and develops analytical solutions for maintenance and repair processes. | 3 | - | 5 | - | - |
| O4 | It explains the fundamental physical principles of hydraulic and pneumatic systems, fluid properties, and the operating principles of circuit components (pumps, compressors, valves, cylinders, etc.). | - | - | - | 5 | - |
| O5 | Draws and reads hydraulic and pneumatic circuit diagrams using standard symbols and technical drawing rules. | - | - | - | 5 | - |
| O6 | Assesses risks in high-pressure fluid and compressed air systems; selects appropriate OHS methods and safety tools, and implements them in compliance with environmental safety regulations. | - | - | - | - | 4 |